LoRaWAN pulse counters
63 devices that measure pulse count, ready to connect to The Things Stack.
63 LoRaWAN devices in the partner network measure pulse count, from 27 vendors including atim, WATTECO and Adeunis. All of them are ready to connect to The Things Stack.
Of these, 16 are rated IP67 or IP68 for outdoor and harsh environments and 8 support LoRaWAN Class B or C for lower downlink latency.
All LoRaWAN pulse counters
The Enless Wireless Tx Pulse 600-036 consists of a pulse sensor that is compatible with pulse meters with a dry contact interface or an open collector inlet. It transmit…
This LoRaWAN pulse transmitter has been specially designed for pulse counting applications on gas meters with a dry contact interface or an open collector inlet.ATEX app…
This LoRaWAN pulse meter transmitter works by reading and transcribing pulsed LED flashes and is therefore compatible with electric meters with light diodes.This radio t…
This LoRaWAN contact/status change transmitter is specifically designed for smart building, security and industrial applications.It meets all types of ON/OFF status chan…
The DINDxxx facilitates the reporting of up to 16 ToR output states. Readings are regularly transmitted over LoRaWAN networks and its configuration is configurable from…
The DINDxx facilitates the reporting of the status of up to 8 dry contacts or up to 8 pulse counter indices. It also allows to remotely control industrial equipments and…
The DINDxx facilitates the reporting of the status of up to 8 dry contacts or up to 8 pulse counter indices. It also allows to remotely control industrial equipments and…
The DINDxxx facilitates the reporting of up to 16 ToR output states. Readings are regularly transmitted over LoRaWAN networks and its configuration is configurable from…
The DINDxx facilitates the reporting of the status of up to 8 dry contacts or up to 8 pulse counter indices. It also allows to remotely control industrial equipments and…
The MR2-EX allows the remote reading of one or two meters with pulse type output (dry contacts). The cycle time is configurable as well as the number of samples per mess…
The MR4 facilitates the remote reading of meters with pulse output and also the reporting of dry contact status. Each channel can be configured alternatively as a count…
The MCCI Catena® 4450 Node for LoRaWAN® technology is a powerful open-source IoT device that consists of temperature, humidity, pressure, lux sensors and also allows the…
The MCCI Catena® 4610 is a LoRaWAN® development board that consists of temperature, humidity, pressure, infrared, white light, and UV sensors. It is based on the Murata…
The MCCI Catena® 4612 is a LoRaWAN® development board that consists of temperature, humidity, pressure, infrared, white light, and UV sensors. It is based on the Murata…
Non-invasive water meter and leakage sensor
The CNDingtek dc500 is a pir people counter, which calculate the people number.
The CNDingtek dc510 is a pir people counter for indoor using, which calculate the people number.
The Decentlab DL-DLR2-002 is an Analog or Digital Sensor Device for LoRaWAN® that consists of a Pulse Counter Dry Contact sensor interface.
The Decentlab DL-DLR2-010 is an Analog or Digital Sensor Device for LoRaWAN® that consists of a Dual Pulse Counter Dry Contact sensor interface.
The EDC communication module is an add-on module for water meters for secure remote reading and for integrating water meters into smart metering systems
The ELSYS ELT Lite is a general LoRaWAN® device for measuring analog or digital signals. It is a 1-channel GPIO wireless transceiver and can also provide power to extern…
EM300-DI LoRaWAN® Pulse Counter is used to remotely read metering data from water meters. It turns existing traditional water meters into smart meters via LoRaWAN® netwo…
Jooby EPHIR RMS LoRaWAN GMEL10 100 EU KT 304862
Jooby EPHIR RMS LoRaWAN GMME10 103 EU КТ 304866
Jooby EPHIR RMS LoRaWAN GMSG10 105 EU KT 304870
The WATTECO LoRaWAN® Flash’O has a pulse sensor for counting the number of light pulses emitted by any type of electronic meter - water, gas, electricity, energy.
FM432p is a multifluid LoRawan reader transmitting « pulse » data consumption from a Gas, Water or Heat meter to a server. It provides the ideal starting point for analy…
The YOBIIQ iQ DSMR (P1) is a member of our Smart Environment Modules family and Smart metering device, DSMR Relay port, a secondary port is available to forward the DSMR…
IWM-LR3 has been designed to allow wireless remote reading in different types of applications from the residential sector to the commercial and industrial sectors. It ca…
The izinto izi-io 4840 is a multi-I/O controller with edge computing and LoRaWAN® connection that provides software configurable inputs for connecting digital, analog, a…
Specially designed for monitoring local power grid transformation substations ('Ortsnetzstationen' in Germany, 10 kV → 230 V), the izinto izi-io 4840 /grid is an industr…
Specially designed for monitoring building heating systems, the izinto izi-io 4840 /heat is an industry-strength controller with edge computing and LoRaWAN® connection.…
The Innotas Modularis water meter attachment consists of a pulse sensor that counts pulses for calculating the water flow volume. It can be attached to water meters with…
LoRaWAN IO module with optional Soil and Air Lux sensors and optional boosted 12v reversible polarity output for latching valves.
Open Close Sensor
M-BUS Master Gateway and LORAWAN Converter
Milesight UC300 series is an IoT controller used for remote control and data acquisition from diverse devices. It contains multiple I/O interfaces including analog input…
Milesight UC50x series is a LoRaWAN® controller used for data acquisition from various sensors and equipments. It contains different I/O interfaces such as analog input,…
The Adeunis Modbus provides an interface for Modbus slave devices to connect with LoRaWAN® networks. It is compatible with RS485/RS232 and provides supervision of up to…
Jooby OMNI RM 4PU204EU KT 304935
The nke WATTECO Press'O sensor turns any 0-10V, 4-20mA analog gauge into a Class A sensor connected to a public or private LoRaWAN® network that allows the monitoring, m…
The WATTECO Press'O sensor turns any 0-10V, 4-20mA analog gauge into a Class A sensor connected to a public or private LoRaWAN® network that allows the monitoring, measu…
The Adeunis Pulse impulse interface allows connecting up to 2 connectable meters (water, gas, electricity, etc) and provides LoRaWAN® connectivity.
The Adeunis Pulse 4 impulse interface allows connecting up to 2 connectable meters (water, gas, electricity, etc) and provides LoRaWAN® connectivity.
The Adeunis Pulse impulse interface allows connecting up to 2 connectable meters (water, gas, electricity, etc) and provides LoRaWAN® connectivity.
The WATTECO Pulse Sens’O consists of a pulse sensor (counter) for remotely reading metering data from three meters - water, gas, electricity, or energy. It turns existin…
The nke WATTECO Pulse Sens’O consists of a pulse sensor (counter) for remotely reading metering data from three meters - water, gas, electricity, or energy. It turns exi…
The WATTECO LoRaWAN® Pulse Sens'O AtEx Zone 1 has a pulse sensor for reading meter data from water, gas (such as Itron, Esther, and Gazpar), or electricity in AtEx zone…
The nke WATTECO LoRaWAN® Pulse Sens'O AtEx Zone 1 has a pulse sensor for reading meter data from water, gas (such as Itron, Esther, and Gazpar), or electricity in AtEx z…
Ultrasonic water meter QALCOSONIC W1 is designed for accurate measurement of cold and hot water consumption in households, apartment buildings and small commercial premi…
The device is connected with a pulse detection interface, which can calculate the number of pulses and send the detected number of pulses to the gateway display. It uses…
The device is connected with two pulse detection interfaces, which can calculate the number of pulses and send the detected number of pulses to the gateway display. It u…
The Adeunis Sigfox Repeater Exxtend the range of the SIGFOX RC1 network
The RHF1S052 is a LoRaWAN water meter that consists of a magnetic pulse counter for water flow reading and a ball valve for water cut-off.
The Baylan TK-4 RF Multi jet Dry type Water Meter consists of a pulse sensor (counter) for reading water usage and it transmits the meter reading via LoRaWAN® radio netw…
The nke WATTECO Toran’O AtEx Zone 1 sensor is used to report status changes, pulse count values, and analog measurements of equipment in the AtEx 1 sensitive zone such a…
The WATTECO Toran’O AtEx Zone 1 sensor is used to report status changes, pulse count values, and analog measurements of equipment in the AtEx 1 sensitive zone such as wa…
IoT Sensor LoRa® modular and scalable combining several measurement acquisition and control functionalities.
The TyNode sensor providing a choice of different measurement. 3 versions available : temperature, pulse counting or and analog measurements.
LoRa Controller
The YO Meter Pulse input accepts connection to potential-free contacts. The device will not count pulses if the input is connected to contacts with any potential. Device…
YO Meter Reader 2.0 is a battery-powered LoRaWAN device enabling data reading from LED pulse detector. Additionally, the device has built-in temperature and humidity sen…
YO Pulse enables monitoring of logical states of devices and processes in automation and collection of pulses from measuring devices (e.g. water meters). The device prov…
Partners offering pulse count devices
Business cases
Automatically meter and bill consumers
Automatically meter and bill consumers
Dispatch technician on failure of redundanct circuit service interruption
Build with us
Join the partner network to list your products and services, reach The Things Stack customers and get technical enablement from our team.